Volume 15 (2022)
Volume 14 (2021)
Volume 13 (2020)
Volume 12 (2019)
Volume 11 (2018)
Volume 10 (2017)
Volume 9 (2016)
Volume 8 (2015)
Volume 7 (2014)
Volume 6 (2013)
Volume 5 (2012)
Volume 4 (2011)
Volume 3 (2010)
Volume 2 (2009)
Volume 1 (2008)
List of the academic editors of Al-Qadisiyah journal for engineering sciences for the period from January 2023 to the present

Khaled Al-Farhany; Ali Fahad Fahem

Volume 16, Issue 1 , March 2023, Pages 1-3

https://doi.org/10.30772/qjes.v16i1.897

Abstract
  Al-Qadisiyah Journal for Engineering Sciences (QJES) is a scientific Open Access peer-reviewed journal. It publishes papers online and hard copy in all areas of the engineering field, including experimental, theoretical, and computational analysis. The first edition of the QJES was published in 2008. ...  Read More

A comparative study of radiation models in spray combustion

Alaa Jasim Al shiblawi; Ahmed Abed Al Kadhem Majhool

Volume 16, Issue 1 , March 2023, Pages 4-13

https://doi.org/10.30772/qjes.v16i1.900

Abstract
  This work deals with the investigation of radiation models for combustion spray. The n-pentane fuel C5h12 is used for chemical reactions with the air. The main objective of these simulations is to compare the experimental data and radiation models for spray combustion and to select the best radiation ...  Read More

Active workplace – Association between workplace layout and physical activity among employees: A cross-sectional study

Janan Sabah Ali; Faris Ali Mustafa

Volume 16, Issue 1 , March 2023, Pages 14-20

https://doi.org/10.30772/qjes.v16i1.842

Abstract
  This study aims to examine the association between workplace layout typology and employees’ physical activity, sedentary behavior, and health. A multi-method approach was conducted for collecting data in four governmental office buildings in Erbil city between April 2022 and June 2022. Qualitative ...  Read More

Experimental investigation of heat transfer in a cavity filled with (50% CuO-50% Al2O3)/Water with hybrid nanofluid attached to a vertically heated wall partially integrated with PCM

Muqdad Al-Maliki; Khaled Al-Farhany

Volume 16, Issue 1 , March 2023, Pages 21-29

https://doi.org/10.30772/qjes.v16i1.912

Abstract
  An empirical evaluation of free convective heat transmission was conducted in a rectangular enclosure containing a hybrid nanofluid of (50% CuO-50% Al2O3)/water linked to a PCM-containing wall. The enclosure's left and right surfaces were kept at constant warm and cold temperatures, whereas the remaining ...  Read More

Anatomical personalized plate implants(APPIs) are the best choice for the treatment of distal femur fracture

Mohammed Mizal Rashida

Volume 16, Issue 1 , March 2023, Pages 30-36

https://doi.org/10.30772/qjes.v16i1.833

Abstract
  For the purpose of fixing the fractured distal femur, usually resorts to the use of metal internal fixation plates with all the accompanying (supportive) fixing devices such as screws, pins, and wires. These plates are manufactured according to standard dimensions and this means that they may not completely ...  Read More

A review of solar air collectors with baffles and porous medium: Types and applications

Mustafa Fouad Yousif; Maathe A. Theeb

Volume 16, Issue 1 , March 2023, Pages 37-41

https://doi.org/10.30772/qjes.v16i1.841

Abstract
  The current study and discussion in detail about the use of different types of porous media and barriers inside solar air heaters is our goal in this survey paper. The effect of different barriers and porous materials of different shapes and types within the solar air collectors and the effect of engineering ...  Read More

Investigation study of electrical discharge machining parameters on material removal rate for AISI M2 material

Shukry H. Aghdeab; Ahmed Basil Abdulwahhab; Zainab H. Mohsein

Volume 16, Issue 1 , March 2023, Pages 42-46

https://doi.org/10.30772/qjes.v16i1.832

Abstract
  EDM (Electrical Discharge Machining) is a common non-traditional machining technique for manufacture geometry parts made of intricate or extremely rigid metals that are challenging to manufacture using conventional manufacturing techniques. Electrical discharge machining by utilizing electrical discharge ...  Read More

A scientometric analysis and bibliometric review of driver injury severity crashes studies

Amjad Hussien Mahdi; Hamsa Zubaidi; Subasish Das

Volume 16, Issue 1 , March 2023, Pages 47-52

https://doi.org/10.30772/qjes.v16i1.870

Abstract
  One of the worst epidemics that endangers our life and has an impact on the future is the epidemic of road accidents. The goal of this study is to define traffic accidents, comprehend their causes, pinpoint the key elements that affect the seriousness of driver injuries, and ultimately identify the factors ...  Read More

Performance of reinforced concrete elements retrofitted with SIFCON under elevated temperatures

H. H. Alzamili; A. M. Elsheikh

Volume 16, Issue 1 , March 2023, Pages 53-57

https://doi.org/10.30772/qjes.v16i1.969

Abstract
  Reinforced concrete (RC) elements lose their structural strength by exposing to fire as the mechanical properties of the reinforcing steel and concrete deteriorate due to the heat. This study provides an understanding of the behavior of three structural concrete elements: beam, column, and slab at high ...  Read More

Utilization of date pits derived Bio-adsorbent for heavy metals in wastewater treatment: Review

Alaa N. Ghanim

Volume 16, Issue 1 , March 2023, Pages 58-69

https://doi.org/10.30772/qjes.v16i1.910

Abstract
  This article provides an overview of the role of raw and burnt date pits as bio-waste for heavy metal removal. In recent years, many studies on the adsorption properties of various low-cost adsorbents, such as agricultural waste and activated carbons based on agricultural waste, have been published. ...  Read More

Residual strength capacity of reinforced reactive powder concrete two-way slabs subjected to drop weight

Sajjad Hameed Majeed; Eyad K. Sayhood; Nisreen S. Mohammed

Volume 16, Issue 1 , March 2023, Pages 70-75

https://doi.org/10.30772/qjes.v16i1.920

Abstract
  This paper presents an experimental investigation of the effect of the impact force on the residual strength capacity of simply supported reactive powder slabs. Eight specimens of reinforced reactive powder concrete slabs with dimensions of 500 x 500 mm and 70 mm in four categories were used. The influences ...  Read More